Exhilarating Announcement! JDMED introduces i-Work Series Intelligent Mobile Physician Nurse Check-in Carts! Banish the traditional round cart and embrace the future of healthcare with our ergonomic design, spacious storage capacity, smart control screen and long-lasting battery power. With JDMED's i-Work series, healthcare professionals can now provide more efficien...
The size of this double step stool is: 46x43x30cm. It can not only be used in hospitals, but also at home, outdoors and schools. It is made of stainless steel and is easy to clean. The stainless steel step surface with anti-slip buffer points is safer during use. Four rubber legs will not scratch the ground during movement.
This gynecological examination table cabinet is made of epoxy-coated steel and has 3 drawers. There is a paper roller holder under the backrest, which can be raised manually with a ratchet. The leg part can be slid under the seat part and is equipped with a Retractable stainless steel oil basin; among other features: •With removable pillow • With one retractable foot st...
This hydraulic delivery table applies ergonomic design and is equipped with a comfortable removable mattress. The entire bed is made of stainless steel. The backrest is mechanically controlled, making it simple and convenient to operate. The foot pedal can adjust the height of the bed to free your hands. The legs can be swung out and detached, and are also equipped with ...
This hydraulic shower stretcher is made entirely of stainless steel #304, and the lying surface is made of special kayak rubber material. The foot pedals on both sides control the hydraulic pumps to adjust the bed height; there are round bumpers on the four sides, and the side rails can Put down; the stretcher is also equipped with hooks for storing drain pipes, using a ...
The frame and base of this transport stretcher are epoxy-coated, the bed platform is epoxy-coated steel, the side rails are aluminum alloy and can be folded with one hand; bilateral control pedals for hydraulically driven height adjustment, • The push handles at both ends are used to adjust the lifting angle of the head and tail of the bed; the casters have independent b...
The main features of this transport stretcher are: • Full perimeter rubber & wheel bumper proctection • Full body HPL board stretcher platform • Adjustable back part x-ray cassette holder • 20cm big wheel and fifth wheel In addition to this, the following standard features are available: • Dual gas spring controlled adjustable backrest • Dual sides foot pedals for hi-l...
The frame and base of this electric examination table are made of epoxy-coated steel, with an integrated mattress, handheld controller, casters with brakes, drain hooks on both sides, electric height adjustment, and a backrest controlled by a gas spring.
This electric recovery table is an integrated mattress and is divided into 3 platforms. It adopts an electric control system to electrically control height adjustment, backrest, and leg adjustment. It can also electrically control Trendelenburg position and inverted Trendelenburg position ; equipped with a foot pedal.
This infusion stand is made of stainless steel and has a push handle for easy movement. It is equipped with 5 casters, caster diameter: 5cm, 2 of which have brake functions for easy transportation; 4 foldable hooks with telescopic IV; height. The adjustment range is 110cm~220cm.
This infusion stand is equipped with a stainless steel pole and a plastic base. The diameter of the base is: 50cm. It has a push handle for easy movement. It is equipped with 5 casters. The diameter of the casters is 5cm. 2 of them have brake functions for easy transportation; 4 Foldable hook with telescopic IV; height adjustment range is 110cm~220cm.
This infusion stand is made of stainless steel and is specially designed to be compatible with infusion pumps. The base is designed with spider legs and has a diameter of 60cm, which is more stable. It is equipped with 6 casters with a diameter of 7.5cm to provide the best support under heavy load. Best flexibility, 3 of them are designed with brakes; the push handle can...
The standard size of this medical screen is: 200cm*185cm. The frame and base are made of high-grade stainless steel. The screen is made of medical-grade screen cloth. Four pages are available and foldable. It is equipped with casters to meet mobile needs.
This pedal is a one-step pedal, with dimensions of 41x23x23cm, epoxy-coated steel frame and legs, non-slip rubber surface. Rubber covers on the bottom of the four-legged pedal.
This medical operating room kick bucket has a bucket body and frame made of stainless steel and is detachable; the bucket body has a handle, and the bottom of the bucket frame is equipped with 4 casters, each of which has brakes for easy movement. Product specifications can refer to the following data: • Bucket volume: 7L • Bucket diameter: 24.5cm • Bucket height: 22.5cm...
This foot pedal can not only be used in hospitals, but also at home, outdoors and in schools. It is made of stainless steel and is easy to clean. The stainless steel step surface with anti-slip buffer points is safer during use. The 4 insertion holes on the pedal table can be used for stacking 2 or more pedals. In specific use environments, it is more convenient and more...
An updated over-bed table made of ABS material. The standard size of the entire table is: 90cm*45cm*72cm/102cm; the base is H-shaped steel, the columns are made of solid steel, and are equipped with ABS covers. There are cup holders on the table; gas springs Control height adjustment, tables are equipped with casters for easy movement.
The backrest of this manual transportation stretcher will rise after cardiopulmonary resuscitation is released; the side rails can be adjusted to 3 levels of position, namely vertical upward, horizontal position, vertical downward position, providing a variety of benefits when in use; the manual crank can adjust the height; In addition to the fixed 4 caster configuration...
The frame and base of this transport stretcher are all epoxy coated, the bed platform is made of epoxy coated steel, the side rails are made of aluminum alloy, and can be folded with one hand; both ends have push handles, and gas springs control the height adjustment of the backrest ;Central brake with four corner foot pedals. Standard accessories: • Stainless steel IV.p...
The overall size of this stainless steel stretcher is: 193cm*70cm*50cm/75cm. It is equipped with a comfortable mattress. The thickness is: 8cm. The entire stretcher body is made of stainless steel. The side rails can be lowered with one hand. It is equipped with a practical tray and oxygen cylinder. This model has three steel cranks with three functions: leg lifting, bac...
An updated cross-bed table made of ABS material. The standard size of the entire table is: 90cm*45cm*72cm/102CM; epoxy-coated steel columns; height adjustable up and down, with casters; this table is lightweight and can be used with one hand. It can be lifted.
The standard size of this cross-bed table is: 90cm*45cm*72cm/102cm; the tabletop is made of HPL board, aluminum alloy columns, and U-shaped steel base; the tabletop has a reading rod with a tilt function; the table is equipped with casters for easy movement.
The frame and base of this electric delivery bed are made of epoxy-coated steel; there are HPL board side rails on both sides. The side rails can be adjusted in 3 gears, including upper, horizontal and lower positions. When the side rails are in the horizontal position, they can function as transfer boards and handrails; the backrest angle and height adjustment are elect...
The frame and platform of this hydraulic delivery bed are made of epoxy resin-coated steel; the lifting hydraulic pump and hydraulic height adjustment can be controlled by foot pedals on both sides; the gas spring controls the backrest adjustment; the main feature of this hydraulic delivery bed is that the leg part can slide to underneath the seat section; in addition, t...
This gynecological examination table is made of high-quality stainless steel and is equipped with 1 drawer, 1 basin and 1 retractable footrest; the backrest can be raised, and the stirrups can be used as leg supports when the leg rests are folded.
Trying to find a medical trolley that is lightweight, spacious, and leaves no corners unturned when it comes to hygiene? Decidedly no longer! Our Magic Box carts have been designed with your needs in mind - offering large capacity, easy maneuverability, and a range of brilliant colors to choose from. Farewell those hard-to-reach places and welcome convenience and effic...
The bed frame, bed panel and base of the 2-function manual medical bed are all made of epoxy-coated steel. The bed panel is a four-section ventilation platform; the headboard and footboard are equipped with bumpers and are removable; nylon crank handle, two-way rotation control The angle of use of the back and legs of the bed; the bed guardrails are made of aluminum allo...
The frame and base of this 2-function manual medical bed are made of epoxy-coated steel. The headboard and footboard are equipped with automatic bumpers and can be disassembled; the bed guardrails are made of aluminum alloy and can be operated with one hand; except In addition, the difference between this medical bed and other medical beds is that the legs of this medica...
This bedside table uses HPL board panels. This kind of material is commonly used for car bodies, drawers and cabinets. It has excellent durability, moisture resistance, steam resistance and heat resistance; each corner is equipped with aluminum wrap; in addition to the bedside table, it is equipped with a In addition to the drawer, there is also a dinner plate that can h...
The body of this bedside table is made of ABS material. Its standard size is: 48x48x82cm; the table top has 4 raised edges and is equipped with a dining table, a drawer and a cabinet with shelves. There are towel racks and two bags on both sides. Hook, with casters, diameter 5cm.
The standard size of this bedside table: 48*46*76cm; the body, drawers and cabinet panels are all made of ABS material, which is resistant to scratches and impacts in daily use, and has excellent resistance to moisture, steam and heat; this The bedside table has one drawer, one cabinet and two doors and is equipped with a dinner plate, which can hold cups and cutlery hol...
This bedside table cabinet is made of epoxy-coated steel; in addition to the main cabinet, there is also a side table. The main cabinet size: 550x465x830mm, the side table size: 585x395mm. The side table can be used as a storage space. The desktop is made of stainless steel. , easy to clean; double-sided open drawers and double-sided open cabinets; the side table is heig...
This is a bed table, table size 800x400x700-1100mm; H-shaped base with 50mm diameter casters, all casters with brakes; laminated wooden surface with rubber buffer pads; stainless steel inner slide tube, gas spring controlled height adjustment.
This is a 3-function medical electric bed with 3 motors that can achieve 3 different functions; the guardrail is made of aluminum alloy and can be operated with one hand; the bed frame, bed board and base are all made of epoxy-coated steel, which is durable And beautiful; the bed board is divided into 4 sections and can be disassembled; the casters are equipped with cent...
The manual 3-function bed is operated by a nylon crank and can be rotated in two directions; the bed frame, bed panel and base are all made of epoxy-coated steel. The headboard and tailboard are equipped with bumpers and can be disassembled independently; the bed panel is made of It is assembled in four sections; the bed guardrails are made of aluminum alloy and can be c...
The entire frame and bed platform of this multifunctional medical bed are made of stainless steel #304; the electric motor can be operated by a manual crank at the same time; the bed guardrails are 3/4 length side rails made of stainless steel #304; the standard configuration of this bed includes: • Deluxe covered casters with brakes • Foot ends store hand crank • There ...
