#Product Trends
Cawomat 2000 IR by CAWO - Simply Practical
CAWO equipment is constructed to run like clockwork. During its design we
faced a particular challenge: we would only be satisfied if a simple press of
the button led to perfect results. And this is exactly what we have achieved
with the CAWOMAT 2000IR, automatic X-ray film processor. Operating
them is child’s play, no instructions are required.
The CAWOMAT 2000IR is an X-ray film processor which can process up to 60
X-ray films per hour suitable for rapid processing. The machine is recommended,
in particular, for accident and emergency departments, for surgical and
orthopaedic clinics and for other specialised departments and practices with an
average daily film consumption of up to 150 sheets.
Installed in No Time :
As a table-top model with the dimensions of 110 x 65 cm the CAWOMAT
2000IR can be installed in the smallest darkroom. Installation is simple. It is
connected to the electricity supply by means of a main socket. The processing
chemicals and rinsing water are supplied via the dispensers incorporated in the
machine. No extra plumbing or additional connections are required.
Ready to Use in No Time :
After filling the dispensers and switching it on, the processor is ready for use.
Lengthy preparations are not required. Heating up the baths takes less time than
carrying out the X-ray examination. Timewise, using the processor fits in
perfectly with everyday work, including that of smaller clinics and practices with
a limited number of X-ray examinations. A special replenishment circuit ensures
perfect image results even when the processor is used irregularly or after long
standstill periods.
Developed in No Time :
The machine operates with a film throughput time of 137 seconds. All stages of
the developing process occur automatically so that once the film has completely
disappeared into the machine you may leave the darkroom. The time in the
darkroom can be reduced to a few seconds by using a light-tight cover available
upon request. The table-top processor has an infrared drying system and an
improved electronic steering system. After the length of the film has been
measured electronically, exact dosing of developer, fixer and water occurs.
Drying takes place at the selected temperatur