#Product Trends
Dawei Ultrasound Machine Tips:
GYN & OB ultrasound machine------DW-T50
1.Introduction of safe use of machine
Pre-use inspection: Please check whether the appearance of the machine is damaged or not, and whether there are scratches on the surface of the machine; please ensure that the probe and the display are connected in good condition.
In use: Please follow the relevant power-on steps to start the machine; during the patient inspection, if the probe is not used for a long time, please freeze the probe; Before changing the probe, please press the freeze button first, and then replace the probe; Please contact the after-sales service and do not disassemble the machine by yourself when come across problems that can’t be solved.
Post-use inspection: After the patient inspection, please clean and disinfect the probe in time; please follow the relevant shutdown steps to shut down the machine.
2. Introduction of probes
As a color Doppler ultrasound diagnostic system with rich measurement packages, this machine can be configured with convex probes, phased array probes, 4D volume probes, micro-convex probes, trans-vaginal probes, linear array probes, and trans-rectal probes. Moreover, the four probe interfaces are fully activated probe channel interfaces, which greatly enriches the choices and meets various requirements.
3. Introduction of New patient information, measurement steps, report generation and save pictures and videos
First, press the “End Exam” to end the examination of the previous patient; then, press the “Patient”, enter the name, age and other information of the new patient to create a patient file; Select the corresponding probe and examination site, and place the probe on the inspection site; After obtaining the scanned image, adjust the gain and other parameters to obtain a clear scanned image; after pressing “Freeze” to freeze the probe, press the “Calc” to call up the corresponding measurement package, and measure parameters such as distance, and finally press the “Save” key to save the current measurement parameters; after freezing the probe, press the “Cine” button for video playback; When the measurement is completed, press the “Report” key to generate a report and edit the report, after connecting the printer, choose the “Print” option at upper left of the screen to print the report.
