Add to favorites

#Product Trends

DPH series Blister Machine-the punching station

DPH series Blister Machine-the punching station

In the Blister Machine, in the punching station, blister cards are punched out of the formed and sealed web during dwell time of the multiple-stroke index. During punching, the web is fixed in position between the convex and concave die. The convex dies press into concave die, thus punching the blister cards out of the formed and sealed web.

Punching station diagram and parts name.

1. Punching Box

2. Protective Cover

3. Punching Guide Plate

4. Convex Die Plate

5. Guide Rail

6. Guide Rail Cover Plate

7. Concave Die

8. Ball Head Nut

9. Screw

10. Die Guide Pillar

11. Die Guide Sleeve

12. Convex Die

13. Waste Material Plate

14. Waste Material Knife

15. punching Station Pillar

Replacement of the punching die

To replace the punching die, we must to power off the Blister Machine for safety.

Take out the old one:

Take out the four ball head nut (8); Take out the concave die (7), the guide rail (5) and the die guide pillar (10); Take out the screws on the convex die plate (4) and take out the convex die plate.

Install the new one:

Install the convex die plate (4) to punching guide plate (3) but do not firmly fasten the screw; Install the concave die (7) to the four punching station pillars (15), let the die guide pillar (10) enter into the die guide sleeve (11); Fasten the convex die plate to the punching guide plate firmly then fasten the ball head nut firmly.

Details

  • Shanghai, China
  • Jornen Machinery